Author Topic: NEED HELP PLEASE!!  (Read 5276 times)

omegadavid99

  • Newbie
  • *
  • Posts: 46
  • Karma: 0
    • View Profile
NEED HELP PLEASE!!
« on: June 26, 2016, 08:16:43 am »
hi i have a problem that i keep getting this bloody error almost everytime i export my model from 3dsmax. because of this error i cant go inside my models in gmod please someone help me!


WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Model has 2-dimensional geometry (less than 0.500 inches thick on any axis)!!!
WARNING: Error with convex elements of X-OZMAH_hull.smd, building single convex!!!!

Joris Ceoen

  • Global Moderator
  • Full Member
  • *****
  • Posts: 236
  • Karma: 27
  • WallWorm Ambassador
    • View Profile
Re: NEED HELP PLEASE!!
« Reply #1 on: June 26, 2016, 08:56:18 am »
This simply means that your collision model has geometry that is smaller than 1 inch (generally this means that you included a single, standalone concave face or geometry with co-planar vertices inside your collision model). That, or you included multiple elements inside your collision model but forgot to tick the $concave tag.

In any event, make sure your collision mesh consists of convex elements only, and that no block or element has a general shape smaller than 1 inch on the grid.

For more information, check these links:
http://dev.wallworm.com/document/69/collision_hulls_in_3ds_max_for_source.html
https://developer.valvesoftware.com/wiki/Collision_mesh
https://developer.valvesoftware.com/wiki/$collisionmodel
« Last Edit: June 26, 2016, 08:58:07 am by Joris Ceoen »