Title: U-Spiral Stairs
Post by: onur89tr on January 11, 2016, 04:33:06 PM
Post by: onur89tr on January 11, 2016, 04:33:06 PM
I couldn't make U-Spiral stairs. But I connected 2 straight stairs to one spiral stairs. And I added railing with some details. This is not my first model, I want to share with you my other model images... :)
With physics
With physics
Title: Re: U-Spiral Stairs
Post by: K@rt on January 12, 2016, 02:42:42 AM
Post by: K@rt on January 12, 2016, 02:42:42 AM
Looks good, onur!! Want to share some more details about your workflow?
U said at the start "I couldn't make U-spiral stairs", what was the issue you were having there?
U said at the start "I couldn't make U-spiral stairs", what was the issue you were having there?
Title: Re: U-Spiral Stairs
Post by: onur89tr on January 12, 2016, 03:08:05 PM
Post by: onur89tr on January 12, 2016, 03:08:05 PM
v2
Bottom of Stairs
U Stairs in 3ds Max
I couldn't make U-Spiral Stairs instantly, because it isn't in 3ds Max. It has u stairs or straight stairs. You can see difference at images.
First, I make 2 straight stairs. and I make spiral stairs. And I connected them. v1's height is 260units, v2's height is 270units. Every stair is 16,875units. And there is 16 stairs. I used normal (bump) map in white areas. You can see it in bottom image.
Shawn Olson said I can't reply your messages couple days. Is he fine?
Bottom of Stairs
U Stairs in 3ds Max
I couldn't make U-Spiral Stairs instantly, because it isn't in 3ds Max. It has u stairs or straight stairs. You can see difference at images.
First, I make 2 straight stairs. and I make spiral stairs. And I connected them. v1's height is 260units, v2's height is 270units. Every stair is 16,875units. And there is 16 stairs. I used normal (bump) map in white areas. You can see it in bottom image.
Shawn Olson said I can't reply your messages couple days. Is he fine?
Title: Re: U-Spiral Stairs
Post by: wallworm on January 13, 2016, 12:27:22 AM
Post by: wallworm on January 13, 2016, 12:27:22 AM
Thanks for sharing :)
Are you sure. Seems like there is a U Stairs. I'll investigate tomorrow.
I'm OK. Except my back hurts! Spent 13 hours driving home from a normally-5-hour-trip. Bad weather plus bad road plowing plus bad drivers turned 1-70 in Pennsylvania into the longest road in America. On the plus side, I can report that my youngest son is just as adept as the next child in wondering when we will be there yet.
Quote from: onur89tr on January 12, 2016, 03:08:05 PM
I couldn't make U-Spiral Stairs instantly, because it isn't in 3ds Max. It has u stairs or straight stairs. You can see difference at images.
Are you sure. Seems like there is a U Stairs. I'll investigate tomorrow.
Quote from: onur89tr on January 12, 2016, 03:08:05 PM
Shawn Olson said I can't reply your messages couple days. Is he fine?
I'm OK. Except my back hurts! Spent 13 hours driving home from a normally-5-hour-trip. Bad weather plus bad road plowing plus bad drivers turned 1-70 in Pennsylvania into the longest road in America. On the plus side, I can report that my youngest son is just as adept as the next child in wondering when we will be there yet.
Title: Re: U-Spiral Stairs
Post by: onur89tr on January 13, 2016, 07:00:12 PM
Post by: onur89tr on January 13, 2016, 07:00:12 PM
And this is my half stairs. For first floor.
Title: Re: U-Spiral Stairs
Post by: wallworm on January 13, 2016, 10:51:03 PM
Post by: wallworm on January 13, 2016, 10:51:03 PM
I had first read the post on my phone while traveling and didn't fully comprehend what your dilemma initially was. Now I understand.
You already have a solution manually, which is good.
I don't have an exact automatic solution at this moment that works perfectly, but you can build spiral U-steps with CorVex in Wall Mode and using Increment:Step. And I would assume you could build some with RailClone fairly easily. Being able to do this with CorVex takes some practice, and it doesn't account for the railings. If I was tasked with this kind of chore and needed to be able to change/update easily, I'd probably tackle it with RailClone.
You already have a solution manually, which is good.
I don't have an exact automatic solution at this moment that works perfectly, but you can build spiral U-steps with CorVex in Wall Mode and using Increment:Step. And I would assume you could build some with RailClone fairly easily. Being able to do this with CorVex takes some practice, and it doesn't account for the railings. If I was tasked with this kind of chore and needed to be able to change/update easily, I'd probably tackle it with RailClone.